Yokomasu Group

Manufacturing Plant
No. 8 & 9, Jalan Utara 2,
Kawasan Perusahaan Mergong,
Jalan Lencong Barat,
05050 Alor Setar,
Kedah, Malaysia.
H/P: +6012-3833138 (Albert)
H/P: +6012-5888316 (Mr. Tneoh)
Whatsapp: +6012-3833138
 
North Malaysia
No. 113, 115 & 117,
Jalan Kota Permai,
Taman Kota Permai,
14000 Bukit Mertajam,
Penang, Malaysia.
Fax: +604-5054007
H/P: +6012-3833138 (Albert)
 
South Malaysia
No. 48 & 50,
Jalan Kempas Indah 1/1,
Taman Kempas Indah,
81300 Johor Bahru,
Johor, Malaysia.
H/P: +6012-3833138 (Albert)
Whatsapp: +6012-3833138

Common Causes of Premature Battery Failures

Causes Due To Correction
Loss of electrolyte Overheating or overcharging Engine maintenance and alternator output correction
Deep discharges Leaving the lights on Immediate recharging
Misapplication/use of under rated battery False economy; inappropriate brand Replacement of battery
Undercharging Loose alternator belt; spent carbon brush Belt tightness adjustment; repair/ replacement of alternator.
Excessive vibration Loose hold-down clamp Clamping adjustment
Acid contamination Use of tap water Replacement of battery
Corrosion High overcharge Use of batteries with expanded plates

Factors Affecting Rate of Discharge
•    Reduce parasitic (key off) load to 120mA or less
•    Parasitic load is the cumulative load produced by electrical devices (clocks, computers, alarms) that continue to operate even after the
     engine has stopped.
   - Loads in excess of 120 mA indicate the presence of extraneous loads that discharge the battery prematurely.


Switch to Mobile Version
available in